The Ritz

Name: The Ritz
SKU: LC01
Availability: InStock

$28.75

(In stock)

LASER CUT – 30″ wingspan

In stock

SKU:LC01 Categories:30" wingspan, Endurance Aircraft, Kits, Laser Cut Airplane Kits, Laser Cut Kits, Rubber Powered

30″ wingspan
Class: Sport flying model

Designed to teach model builders how to build and fly, the Ritz will give long consistent outdoor flights. This plane has a balsa stick fuselage and built-up wing construction. Designed for rise off ground flights (ROG). Pre-1942 design, eligible for Society of Antique Modelers (SAM) contests.

This free flight rubber powered kit contains a full-size rolled plan, LASER CUT balsa parts, hand-picked balsa strip wood, rubber motor, 10″ E-B propeller, prop hanger and shaft, wheels, landing gear wire, Ritz waterslide markings, and Easy Built Lite tissue in a variety of bright colors. To build this kit you will need a building board, hobby knife, fine sandpaper, and glue.

CUSTOMER BUILDS & INFO:
View the images below in a larger format by clicking HERE

“These are the East Coast Pictures. My Mom …Asta…my brother…Erik..my sister …Marje and brother-in law Jason. Our squadron sports a Fantasy Fighter, Italian colors , Estonian Flag and Independence date, a Red Baron, and Butterfly decorations. The pilot names in order are Aeronator, Her Highness, Mothership, Superfly, and Flutterwings.” – Heikki Riivald

Turtles rule! Sometimes all it takes to get kids started building an airplane are some cool stickers to decorate their plane. Ask us to include some of our “seconds” free markings when buying a plane to build with a child.

“I built the Ritz mostly according to plan, but with the addition of a couple of braces in the wing, and I used light weight plastic RC style wheels to help with ROG take offs. I found that the use of epoxy was essential where the music wire meets the wing, and also where the tail boom meets the fuse. These need to be very strong bonds! It is possible to build this model to be very light weight, and there is a certain appeal to an ‘only the essentials’ flying model. You get alot of fun, easy flying for the amount of time it takes to build.” – Kevin Laitala

“Since this model was from the 1940’s, I took the liberty of making look like a Wakefield model.” – Heikki

“Hello, here is my Ritz, I found the kit to be very straightforward and liked the instructions too. It flies nice when the CG is set right, and in most cases will fly no less than a minute!” – Jenny Heard

“Finished the Ritz in Ukrainian colors” – Norman Vaughan

“Our Ritz and Jimmie Allen Special both fly well in the southern hemisphere too – Many hours of fun had and being had by both myself and the kids!” – Toby Wetherill

“I built the Ritz and installed an ar6400 receiver with an e flight p-51 motor gear drive and prop, used some 2 mm carbon fiber to stiffen the fuselage, left it a twin fin, made a bellcrank under the stab with wires leading to the rudders, also shortened the nose 2 1/2 inches. Great flying little plane! Very responsive and the p-51 gear is plenty of motor, has a great climb out rate and is a ball to fly! Thank you again for continuing to make great kits for us modelers who prefer to do it the hard way.” – Jerry Carmer

See another Ritz original. And another.

Submit a photo of your model!